{
  "schema": "serenity.skill-task-template/1",
  "id": "TL-STRAIGHT-STROKING-TARGET-001",
  "title": "先直進推刃，再加入左右偏向",
  "status": "planned-not-dispatched",
  "primaryReference": "usfsa-basic3a-straight-stroking-001",
  "referencePath": "straight-stroking-reference.json",
  "firstPropulsionSkill": "straight-forward-alternating-stroking",
  "model": "existing-two-leg-finite-motor-model-with-aggregate-upper-body",
  "curriculum": [
    {"id": "balance-prerequisite", "order": 0, "objective": "維持既有單足滑行，左右支撐分開評估；先完成每回合程序退出與資源檢查。", "active": true},
    {"id": "one-push-to-glide", "order": 1, "objective": "從雙足靜止或低速開始，一腳推刃、另一腳接續滑行；左右分開練習。", "initialSpeedMps": [0, 0.2], "active": false},
    {"id": "straight-alternating", "order": 2, "objective": "沿固定前進方向交替推刃，連續兩個完整左右循環後維持單足滑行。", "minimumAlternatingCycles": 2, "active": false},
    {"id": "oleg-directed-stroking", "order": 3, "objective": "再加入前左／前右偏向與弧線推刃。", "referenceSequenceIds": ["oleg-three-left-forward", "oleg-three-right-forward", "oleg-source-forward"], "active": false}
  ],
  "phaseOrder": ["flex-and-transfer", "loaded-push", "unload-and-lift", "free-foot-recovery", "touchdown-and-accept-load", "opposite-push"],
  "phaseTransitions": "contact-and-state-events-with-hysteresis; no forced video timestamp transitions",
  "engineeringTargets": {
    "source": "design-proposal-not-video-measurement",
    "headingCommandRad": 0,
    "corridorHalfWidthM": 0.45,
    "headingToleranceRad": 0.35,
    "targetSpeedMps": [0.5, 1.0],
    "postPushGlideSeconds": 5,
    "bladeWorldBankLimitDeg": null,
    "bladeBankPolicy": "allow bank required by contact and balance; enforce existing joint, motor, slip and physical-validity limits",
    "freeAnklePrior": "mild plantarflexion relative to shank; soft phase-dependent prior; fade before touchdown",
    "freeBladeVerticalWorldTarget": false,
    "pathObjective": "bound long-term cross-track and mean heading, allow alternating lateral transfer",
    "propulsionEvidence": "forward displacement and speed gain from measured contact impulses and finite joint work; pair with no-push coast baseline"
  },
  "controllerGrowth": {
    "frozenBalanceCoreParameters": 16,
    "preserveExistingResidualCheckpoint": true,
    "newModule": "phase-conditioned push and weight-transfer residual, added after task preflight",
    "trainableScope": "both legs within existing finite motor envelope",
    "styleObjectiveInitially": "disabled",
    "globalRootForceAllowed": false,
    "directRootVelocityWritesDuringEpisodeAllowed": false,
    "retentionEvaluation": "original single-foot glide, left and right separately"
  },
  "dispatchRequirements": [
    "Specify and freeze a new propulsion environment, reward, seeds, contact events and budget before dispatch.",
    "Validate both support sides; present historical left-only results as left-only.",
    "Use contact-derived lift and touchdown events, with no hard video blade-angle or touchdown labels.",
    "Verify one-push motion uses finite torques and dissipative contact, without root-state resets during an episode.",
    "Confirm every owned Python child exits before the next rollout or generation starts; stop on timeout or low memory without retry."
  ],
  "laterUnspecifiedUserExtension": null
}
