{
  "schema": "serenity.robot.contact-profile/1",
  "id": "illustrative-rocker-rails-v1",
  "status": "hypothesis-requires-engine-validation",
  "units": {
    "length": "m",
    "friction": "dimensionless",
    "torsionalFriction": "m"
  },
  "geometry": {
    "rockerRadiusM": 2.1,
    "tailXM": -0.15,
    "toeXM": 0.17,
    "railHalfSpacingM": 0.002,
    "railRadiusM": 0.0008,
    "railSegmentsPerSide": 7,
    "toePickCenterM": [
      0.182,
      0,
      -0.132
    ],
    "toePickRadiusM": 0.004,
    "basis": "legacy illustrative blade curve, not measured equipment; capsules approximate curved twin rails/hollow"
  },
  "response": {
    "longitudinalMu": 0.03,
    "lateralMu": 0.75,
    "torsionalFrictionM": 0.0001,
    "toePickMu": 0.9,
    "normalSolrefTimeSec": 0.008,
    "normalDampingRatio": 1,
    "basis": "declared synthetic test profile; not measured figure-skating friction",
    "loadDomainN": [
      0,
      1800
    ],
    "speedDomainMps": [
      0,
      15
    ],
    "outsideDomain": "flag-outside-profile-domain"
  },
  "runtimeContract": [
    "Resolve actual normal contact in engine; never impose planned load as actual load.",
    "Use actual loaded anatomical rail to label edge. Both rails may load; low-load is unknown.",
    "Project each foot's local forward axis into its contact tangent plane for anisotropic friction.",
    "Do not interpret geom friction tuple as two separate tangential coefficients.",
    "Aggregate actual force across rail segments; never multiply total grip by segment count.",
    "Rate/power limiting and contact passivity/convergence are runtime responsibilities."
  ],
  "provenance": {
    "geometry": "../../skater-model.js bladeModel, illustrative only",
    "engineDocs": "https://mujoco.readthedocs.io/en/stable/computation.html#contact"
  }
}
